Critical Environments

Trilites 984 CP

Tri-polymer formula for protection against chemical splashes

Specific advantages

Productivity

Extended length offers extra protection to hand & wrist area
Exclusive finish minimizes tape and label sticking to gloves

Guaranteed quality

Silicone free to prevent traces, defects on metal sheet and glass prior to painting

Specific features

Powder-free clean process for no cross contamination

Applications

Electronics

Electronic component assembly (displays, LEDs, etc.)

Laboratory

Manufacturing of medicines
Pharmaceutical preparation

Product detail

Material	Natural latex, polychloroprene and nitrile
Colour	mauve
Interior finish	Chlorinated
Exterior finish	Pebbled
Length (inches)	11.5”
Thickness (inches)	0.006” (6 mil)
Size	6 7 8 9
Packaging	100 gloves/bag 1000 gloves/carton

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of the colours :

Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT: Not tested

NA: "Not applicable" because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical Product	CAS #	Breakthrough time (minutes)	Permeation level	Standard	Degradation level	Rating
2-Propanol (Isopropanol) 99%	67-63-0	4	0	ASTM F1383	NT	NA
Acetone 99%	67-64-1	1	0	ASTM F1383	NT	NA
Ammonium hydroxide solution 29%	1336-21-6	10	0	ASTM F1383	NT	NA
Benzene 99%	71-43-2	1	0	ASTM F739	1	-
Bromobenzene 99%	108-86-1	1	0	EN 374-3:2003	NT	NA
Hydrochloric acid 35%	7647-01-0	11	1	EN 16523-1:2015	NT	NA
Hydrochloric acid 37%	7647-01-0	110	3	ASTM F1383	NT	NA
Hydrofluoric Acid 49%	7664-39-3	27	1	ASTM F739	NT	NA
Hydrotreated Light Naphthenic Distillate mixture	64742-53-6	13	1	ASTM F739	1	-
Kerosene mixture	8008-20-6	4	0	ASTM F739	1	-
Methanol 99%	67-56-1	10	0	EN 374-3:2003	NT	NA
n-Butanol 99%	71-36-3	2	0	EN 374-3:2003	NT	NA
N-Vinyl-2-Pyrrolidinone 99%	88-12-0	8	0	ASTM F1383	NT	NA
Naphtha VM&P mixture	8032-32-4	0	0	ASTM F739	1	-
Nitric acid 68%	7697-37-2	14	1	EN 374-3:2003	NT	NA
Phenol 85%	108-95-2	7	0	ASTM F739	3	=
Phosphoric acid 85%	7664-38-2	480	6	EN 16523-1:2015	NT	NA
Sodium hydroxide 20%	1310-73-2	480	6	EN 374-3:2003	NT	NA
Sodium hydroxide 40%	1310-73-2	480	6	EN 374-3:2003	NT	NA
Sodium hydroxide 50%	1310-73-2	480	6	EN 374-3:2003	NT	NA
Sulfuric acid 96%	7664-93-9	6	0	EN 16523-1:2015	NT	NA
Unleaded gasoline mixture	8006-61-9	1	0	ASTM F739	1	-