TempTec 332
Effective thermal insulation and resistance to a wide range of chemical
Thermal ProtectionGallery
Specific advantages
- Excellent thermal insulation, due to double-knit cotton
- Good grip on slippery objects, due to the embossed texture
- Multi-purpose chemical resistance (acids, aliphatic solvents) increased by the thickness of the material
- Silicone free to prevent traces, defects on metal sheet and glass prior to painting
Applications
Mechanical industry
- Chemical treatment of metals
- Oil quenching of steel
Petrochemical industry
- Sampling of hot petrochemical products
Other industries
- Boiler room work
- Handling of hot piping
- Handling of moulds in the ceramic industry
- Manufacture of adhesives
- Manufacture of insulating electric wires
- Road works in cold conditions
- Steam cleaning
Rubber industry
- Polymer extrusion
Standards
-
2212X
-
Type A
ACLMNS
-
X2XXXX
-
111
Product detail
| Material | Polychloroprene |
|---|---|
| Colour | Black, blue |
| Interior finish | Knitted thermal protection |
| Exterior finish | Pebbled |
| Length (inches) | 14.2” |
| Size | 8 9 10 |
| Packaging | 1 pair/bag 6 pairs/carton |
Chemical chart
OVERALL CHEMICAL PROTECTION RATING
Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.
Meaning of the colours :
Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT: Not tested
NA: "Not applicable" because not fully tested (only degradation OR permeation results)
The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time
| Chemical Product | CAS # | Breakthrough time (minutes) |
Permeation level |
Standard | Degradation level |
Rating |
|---|---|---|---|---|---|---|
| 1,1,1-Trichloroethane 99% | 71-55-6 | 20 | 1 | ASTM F739 | 1 |
|
| 1,1,2-Trichloroethane 97% | 79-00-5 | 7 | 0 | ASTM F739 | 2 |
|
| 1,2 - dichloroethane 99% | 107-06-2 | 6 | 0 | ASTM F739 | NT |
|
| 2-Bromo-ethyl acetate 97% | 927-68-4 | 52 | 2 | ASTM F739 | 2 |
|
| 2-Hydroxyethyl Methacrylate 97% | 868-77-9 | 480 | 6 | ASTM F739 | NT |
|
| 2-Propanol (Isopropanol) 99% | 67-63-0 | 450 | 5 | ASTM F739 | 4 |
|
| 2,4-Di-tertiary Butylphenol 99% | 96-76-4 | 29 | 1 | ASTM F739 | NT |
|
| 2,6-Dimethyl-4-heptanone (Diisobutyl Ketone) 80% | 108-83-8 | 56 | 2 | ASTM F739 | 3 |
|
| Acetaldehyde 99% | 75-07-0 | 5 | 0 | ASTM F739 | NT |
|
| Acetic acid 10% | 64-19-7 | NT | NT | 4 |
|
|
| Acetic acid 50% | 64-19-7 | NT | NT | 4 |
|
|
| Acetic acid 99% | 64-19-7 | 210 | 4 | ASTM F739 | 4 |
|
| Acetone 99% | 67-64-1 | 8 | 0 | ASTM F739 | 3 |
|
| Acetonitrile 99% | 75-05-8 | 62 | 3 | EN 16523-1:2015 | 4 |
|
| Acrylate 2-Hydroxyethyl 96% | 818-61-1 | 480 | 6 | ASTM F739 | NT |
|
| Acrylic acid 99% | 79-10-7 | 268 | 5 | EN 16523-1:2015 | 4 |
|
| Acrylonitrile 99% | 107-13-1 | 19 | 1 | ASTM F739 | NT |
|
| Ammonium hydroxide solution 29% | 1336-21-6 | 265 | 5 | ASTM F739 | 4 |
|
| Amyl Acetate 99% | 628-63-7 | 25 | 1 | ASTM F739 | 2 |
|
| Amyl Alcohol 99% | 71-41-0 | 480 | 6 | ASTM F739 | 4 |
|
| Aniline 99% | 62-53-3 | 142 | 4 | ASTM F739 | 4 |
|
| Benzene 99% | 71-43-2 | 3 | 0 | ASTM F739 | NT |
|
| Benzotrichloride 100% | 98-07-7 | 63 | 3 | ASTM F739 | NT |
|
| Benzoyl Chloride 100% | 98-88-4 | 28 | 1 | ASTM F739 | NT |
|
| Benzyl Chloride 99% | 100-44-7 | 17 | 1 | ASTM F739 | 2 |
|
| Butyl Acetate 99% | 123-86-4 | 17 | 1 | ASTM F739 | 1 |
|
| Butyl Acrylate 99% | 141-32-2 | 15 | 1 | ASTM F739 | 1 |
|
| Calcium Hydroxide 0,18% | 1305-62-0 | 480 | 6 | ASTM F739 | 4 |
|
| Carbon disulfide 99% | 75-15-0 | 1 | 0 | ASTM F739 | 3 |
|
| Carbon Tetrachloride 99% | 56-23-5 | 24 | 1 | ASTM F739 | 3 |
|
| Chlorine 100% | 7782-50-5 | 480 | 6 | ASTM F739 | NT |
|
| Chlorine 99% | 7782-50-5 | 44 | 2 | ASTM F739 | NT |
|
| Chloroform 99% | 67-66-3 | 2 | 0 | ASTM F739 | NT |
|
| Chromic Acid 50% | 7738-94-5 | 348 | 5 | ASTM F739 | 4 |
|
| Cumene 98% | 98-82-8 | 22 | 1 | ASTM F739 | 1 |
|
| Cyclohexane 99% | 110-82-7 | 35 | 2 | ASTM F739 | 3 |
|
| Cyclohexanol 99% | 108-93-0 | 480 | 6 | ASTM F739 | 4 |
|
| Cyclooctadiene 99% | 111-78-4 | 23 | 1 | ASTM F739 | NT |
|
| Dibutyl Phthalate 99% | 84-74-2 | 480 | 6 | ASTM F739 | 4 |
|
| Dichloromethane (Methylene Chloride) 99% | 75-09-2 | 4 | 0 | ASTM F739 | 3 |
|
| Diethylamine 98% | 109-89-7 | 4 | 0 | ASTM F739 | NT |
|
| Dimethyl Sulfide 99% | 75-18-3 | 2 | 0 | ASTM F739 | 1 |
|
| Dimethylformamide 99% | 68-12-2 | 30 | 1 | ASTM F739 | 3 |
|
| Dimethylsulfoxide 99% | 67-68-5 | 456 | 5 | ASTM F739 | 4 |
|
| Diphenyl Phospite NA | 4712-55-4 | 480 | 6 | ASTM F739 | NT |
|
| Ethanol 95% | 64-17-5 | 363 | 5 | ASTM F739 | 4 |
|
| Ether (Diethyl Ether) 99% | 60-29-7 | 4 | 0 | ASTM F739 | 3 |
|
| Ethyl acetate 99% | 141-78-6 | 8 | 0 | ASTM F739 | NT |
|
| Ethyl acrylate 99% | 140-88-5 | 18 | 1 | ASTM F739 | 1 |
|
| Ethyl benzene 99% | 100-41-4 | 1 | 0 | ASTM F739 | NT |
|
| Ethyl Chloroformate 97% | 541-41-3 | 4 | 0 | ASTM F739 | 2 |
|
| Ethylene glycol 99% | 107-21-1 | 480 | 6 | ASTM F739 | 4 |
|
| Formaldehyde 37% | 50-00-0 | 480 | 6 | ASTM F739 | 4 |
|
| Formic Acid 96% | 64-18-6 | NT | NT | 4 |
|
|
| Fuel oils mixture | 68476-34-6 | 480 | 6 | ASTM F739 | NT |
|
| Glutaraldehyde 50% | 111-30-8 | NT | NT | 4 |
|
|
| Hexachlorocyclopentadiene 100% | 77-47-4 | 30 | 1 | ASTM F739 | NT |
|
| Hydrazine 35% | 302-01-2 | 480 | 6 | ASTM F739 | 4 |
|
| Hydrazine 70% | 302-01-2 | NT | NT | 4 |
|
|
| Hydrochloric acid 10% | 7647-01-0 | 480 | 6 | ASTM F739 | 4 |
|
| Hydrochloric acid 35% | 7647-01-0 | NT | NT | 4 |
|
|
| Hydrochloric acid 37% | 7647-01-0 | 480 | 6 | ASTM F739 | 4 |
|
| Hydrofluoric Acid 10% | 7664-39-3 | 480 | 6 | ASTM F739 | 4 |
|
| Hydrofluoric Acid 40% | 7664-39-3 | 480 | 6 | EN 16523-1:2015 | NT |
|
| Hydrofluoric Acid 49% | 7664-39-3 | 480 | 6 | ASTM F739 | 4 |
|
| Hydrogen fluoride Anhydrous 99% Gas | 7664-39-3 | 35 | 2 | ASTM F739 | NT |
|
| Hydrogen peroxide 30% | 7722-84-1 | 480 | 6 | EN 16523-1:2015 | 4 |
|
| Hypophosphorous Acid 50% | 6303-21-5 | 480 | 6 | ASTM F739 | NT |
|
| Isobutyl alcohol 99% | 78-83-1 | 480 | 6 | ASTM F739 | 4 |
|
| m,o,p-Chlorotoluene mixture | 25168-05-2 | 15 | 1 | ASTM F739 | NT |
|
| Maleic Acid 9,1% | 110-16-7 | 480 | 6 | ASTM F739 | 4 |
|
| meta-Xylene 99% | 108-38-3 | NT | NT | 2 |
|
|
| Methanol 85% | 67-56-1 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Methanol 99% | 67-56-1 | 262 | 5 | EN 16523-1:2015 | 4 |
|
| Methyl Ethyl Ketone (2-Butanone) 99% | 78-93-3 | 9 | 0 | ASTM F739 | 1 |
|
| Methyl methacrylate 95% | 80-62-6 | 15 | 1 | EN 374-3:2003 | 1 |
|
| Methylamine 40% | 74-89-5 | 391 | 5 | ASTM F739 | 4 |
|
| Methylisobutylketone 99% | 108-10-1 | 19 | 1 | ASTM F739 | 2 |
|
| Mineral Spirits 100% | 64475-85-0 | 127 | 4 | ASTM F739 | NT |
|
| n-Butanol 99% | 71-36-3 | 480 | 6 | ASTM F739 | 4 |
|
| n-Heptane 99% | 142-82-5 | 50 | 2 | ASTM F739 | 4 |
|
| n-hexane 95% | 110-54-3 | 36 | 2 | ASTM F739 | 4 |
|
| N-methyl-2-Pyrrolidone 99% | 872-50-4 | 71 | 3 | EN 16523-1:2015 | NT |
|
| N-N dimethyl acetamide 99% | 127-19-5 | 45 | 2 | ASTM F739 | 2 |
|
| n-Propanol 99% | 71-23-8 | 480 | 6 | ASTM F739 | 4 |
|
| N,N-Diisopropylethylamine 99% | 7087-68-5 | 301 | 5 | ASTM F739 | 4 |
|
| Naphtha (Stoddart Solvent) mixture | 8052-41-3 | 241 | 5 | ASTM F739 | 3 |
|
| Naphtha Heavy mixture | 68551-17-7 | NT | NT | 4 |
|
|
| Naphtha VM&P mixture | 8032-32-4 | 23 | 1 | ASTM F739 | 4 |
|
| Nitric acid 10% | 7697-37-2 | NT | NT | 4 |
|
|
| Nitric acid 20% | 7697-37-2 | NT | NT | 4 |
|
|
| Nitric acid 40% | 7697-37-2 | NT | NT | 4 |
|
|
| Nitric acid 50% | 7697-37-2 | NT | NT | 4 |
|
|
| Nitric acid 65% | 7697-37-2 | 480 | 6 | EN 16523-1:2015 | 4 |
|
| Nitric acid 68% | 7697-37-2 | NT | NT | 4 |
|
|
| Nitric acid 70% | 7697-37-2 | NT | NT | 4 |
|
|
| Nitric acid 90% | 7697-37-2 | 3 | 0 | ASTM F739 | NT |
|
| Nitrobenzene 99% | 98-95-3 | 52 | 2 | ASTM F739 | NT |
|
| Nonylphenol 99% | 25154-52-3 | 480 | 6 | ASTM F739 | NT |
|
| Oleic Acid 90% | 112-80-1 | NT | NT | 3 |
|
|
| Oleum (free SO3) 30% | 8014-95-7 | 10 | 0 | ASTM F739 | NT |
|
| Parachlorobenzotrichloride 99% | 5216-25-1 | 70 | 3 | ASTM F739 | NT |
|
| Pentane 99% | 109-66-0 | NT | NT | 4 |
|
|
| Phenol 85% | 108-95-2 | 480 | 6 | ASTM F739 | 4 |
|
| Phosphoric acid 75% | 7664-38-2 | 480 | 6 | ASTM F739 | 4 |
|
| Phosphoric acid 85% | 7664-38-2 | 480 | 6 | ASTM F739 | 4 |
|
| Potassium Hydroxide 50% | 1310-58-3 | 480 | 6 | ASTM F739 | 4 |
|
| Potassium Iodide 59% | 7681-11-0 | 480 | 6 | ASTM F739 | 4 |
|
| Propylene Oxide 99% | 75-56-9 | 1 | 0 | ASTM F739 | NT |
|
| Pyridine 99% | 110-86-1 | 10 | 0 | ASTM F739 | 1 |
|
| Sodium Carbonate 21,6% | 497-19-8 | 480 | 6 | ASTM F739 | 4 |
|
| Sodium hydroxide 20% | 1310-73-2 | 480 | 6 | ASTM F739 | 4 |
|
| Sodium hydroxide 40% | 1310-73-2 | 480 | 6 | ASTM F739 | 4 |
|
| Sodium hydroxide 50% | 1310-73-2 | 480 | 6 | ASTM F739 | 4 |
|
| Sodium Thiosulfate 41,2% | 7772-98-7 | 480 | 6 | ASTM F739 | 4 |
|
| Styrene 99% | 100-42-5 | 2 | 0 | ASTM F739 | NT |
|
| Sulfur dichloride 100% | 10545-99-0 | 30 | 1 | ASTM F739 | NT |
|
| Sulfur monochloride 100% | 10025-67-9 | 480 | 6 | ASTM F739 | NT |
|
| Sulfuric acid 10% | 7664-93-9 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Sulfuric acid 40% | 7664-93-9 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Sulfuric acid 96% | 7664-93-9 | 88 | 3 | ASTM F739 | 2 |
|
| t-Butyl Methyl Ether 98% | 1634-04-4 | 6 | 0 | ASTM F739 | NT |
|
| tert-Butyl Hydroperoxide 70% | 75-91-2 | 454 | 5 | ASTM F739 | NT |
|
| Tetrachloroethylene (Perchloroethylene) 99% | 127-18-4 | 7 | 0 | ASTM F739 | 1 |
|
| Tetrahydrofurane 99% | 109-99-9 | 3 | 0 | ASTM F739 | 3 |
|
| Toluene 99% | 108-88-3 | 6 | 0 | ASTM F739 | 1 |
|
| Trichloroethylene 99% | 79-01-6 | 1 | 0 | ASTM F739 | NT |
|
| Triethylamine 99% | 121-44-8 | 35 | 2 | ASTM F739 | 2 |
|
| Trifluoroacetic Acid 99% | 76-05-1 | 480 | 6 | ASTM F739 | 4 |
|
| Unleaded gasoline mixture | 8006-61-9 | 8 | 0 | ASTM F739 | 1 |
|
| Vinyl acetate 99% | 108-05-4 | 14 | 1 | ASTM F739 | 2 |
|
| Xylene 99% | 1330-20-7 | 17 | 1 | ASTM F739 | 1 |
|
*not normalized result
More gloves
Thermal Protection
Temp-Tec NL517
A double-layer glove, with thermal insulation and extended length for extra arm protection.
