Alto 285

Good mechanical performance for long-lasting chemical protection

Chemical Protection

Gallery

Specific advantages

Long cuff provides better protection of the forearm
Longer service life and good impact protection, due to the thickness of the material
Silicone free to prevent traces, defects on metal sheet and glass prior to painting

Specific features

Reinforced grip for better handling

Applications

Mechanical industry

Maintenance in wet environments (water, oil, greases, hydrocarbons)

Other industries

Maintenance in wet environments

Standards

2131X
Type A ABKMPT

Product detail

Material	Natural latex
Colour	Yellow, beige
Interior finish	Chlorinated
Exterior finish	Reinforced grip
Length (inches)	23.6”
Thickness (inches)	0.039” (39 mil)
Size	8 9 10
Packaging	1 pair/bag 30 pairs/carton

Chemical chart

OVERALL CHEMICAL PROTECTION RATING

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of the colours :

Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT: Not tested

NA: "Not applicable" because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical Product	CAS #	Breakthrough time (minutes)	Permeation level	Standard	Degradation level	Rating
Acetic acid 10%	64-19-7	480	6	EN 374-3:2003	NT	NA
Acetic acid 99%	64-19-7	138	4	EN 374-3:2003	NT	NA
Acetone 100%	67-64-1	84	3	EN 16523-1:2015	NT	NA
Acetone 99%	67-64-1	NT	NT		2	NA
Dimethylformamide 99%	68-12-2	147	4	EN 374-3:2003	NT	NA
Ethanol 95%	64-17-5	160	4	EN 374-3:2003	NT	NA
Formaldehyde 37%	50-00-0	480	6	EN 16523-1:2015	4	++
Hydrochloric acid 10%	7647-01-0	480	6	EN 374-3:2003	NT	NA
Hydrochloric acid 35%	7647-01-0	480	6	EN 374-3:2003	NT	NA
Hydrogen peroxide 30%	7722-84-1	480	6	EN 16523-1:2015	3	++
Methanol 99%	67-56-1	331	5	EN 16523-1:2015	4	++
Methyl Ethyl Ketone (2-Butanone) 99%	78-93-3	25	1	EN 374-3:2003	NT	NA
N-methyl-2-Pyrrolidone 99%	872-50-4	210	4	EN 374-3:2003	NT	NA
Nitric acid 65%	7697-37-2	480	6	EN 16523-1:2015	4	++
Phosphoric acid 75%	7664-38-2	480	6	EN 374-3:2003	NT	NA
Phosphoric acid 85%	7664-38-2	480	6	EN 374-3:2003	NT	NA
Sodium hydroxide 20%	1310-73-2	480	6	EN 374-3:2003	NT	NA
Sodium hydroxide 40%	1310-73-2	480	6	EN 16523-1:2015	4	++
Sodium hydroxide 50%	1310-73-2	480	6	EN 374-3:2003	NT	NA
Sulfuric acid 10%	7664-93-9	480	6	EN 374-3:2003	NT	NA
Sulfuric acid 40%	7664-93-9	480	6	EN 374-3:2003	NT	NA
Sulfuric acid 50%	7664-93-9	480	6	EN 374-3:2003	NT	NA
Sulfuric acid 96%	7664-93-9	480	6	EN 374-3:2003	NT	NA

*not normalized result

More gloves

Liquidproof Protection